ZFC54

In-line Air Filter Series ZFC

Characteristic
Space-saving, light weight.
Built-in One-touch fitting.
Element can be replaced.
Easy element replace procedure.
In-line style, easy installation.
Standard with Bracket.

Specification

Fluid	Air
Operating pressure	0.1MPa~-100 kPa
Burst pressure	1.5 MPa
Operating and ambient temperature range	0~60℃
Filtration degree	5 µm

How to order






Flow Characteristics



Dimension

Model	A	B	C	D	E	F	G	H	I	J	K	L
ZFC53-B	6.4	15.7	13.5	24.7	30	53.9	20	Ø4	33.4	18	19	23
ZFC54-B	6.4	15.7	13.5	24.7	30	53.9	20	Ø6	33.4	18	19	23
ZFC74-B	8.7	20.7	19.2	28.5	34	68.4	24	Ø6	39.8	20	23.6	27.3
ZFC75-B	8.7	20.7	19.2	28.5	34	68.4	24	Ø8	39.8	20	23.6	27.3
ZFC76-B	8.7	26.7	19.2	33.8	34	79.7	24	Ø10	39.8	20	23.6	27.3
ZFC77-B	8.7	26.7	19.2	33.8	34	79.7	24	Ø12	39.8	20	23.6	27.3

Element Replacement
1. Stop operation and reduce the filter's internal pressure to atmosphere.
2. Slide the lock mechanism in the direction of the arrow to release the lock.
3. Rotate the cover counterclockwise at least 90 degrees.
4. Pull cover A out of the case to remove the element. Remove dust and other debris remaining inside the case by blowing it out with air, etc. (Also confirm that the O-ring is not damaged.)
5. Install a new element on cover and insert it into the case.
6.Align the raised part of the cover with the model no. display of the body and push the cover to the end of the body and rotate it clockwise until it stops
7. Set the lock mechanism and check that the cover is locked completely.
 

Prev:ZFC100-04 Next:end