PRODUCT CATEGORY
CONTACT US
YUEQING BETRE AUTOMATION CO.,LTD. Add:Baishi Industrial, Yueqing, Zhejiang, CN Contact Person: Betre H Tel:+86-577-61712130 Fax:+86-577-61712160 Email:betre@betre.cc MSN:betreauto@hotmail.com SKYPE:betreauto
Skype:
Skype:
CM2 Series Mini Cylinder
CM2 Series Mini Cylinder
Mini Cylinder Series CM2
Specification
* Operate the cylinder with in the allowable kinetic energy.
Strokes
Dimension
Specification
Strokes
Dimension
Specification
| Bore Size(mm) | 20 | 25 | 32 | 40 | |||||
| Type | Pneumatic | ||||||||
| Action | Double acting, Single rod | ||||||||
| Fluid | Air | ||||||||
| Proof pressure | 1.5 MPa | ||||||||
| Maximum operating pressure | 1.0 MPa | ||||||||
| Minimum operating pressure | 0.05 MPa | ||||||||
| Ambient and fluid temperature |
Without auto switch: −10°C to 70°C With auto switch: −10°C to 60°C (No freezing) |
||||||||
| Lubrication | Not required (Non-lube) | ||||||||
| Stroke length tolerance | (+1.4~0) mm | ||||||||
| Piston speed | 50 to 750 mm/s | ||||||||
| Cushion | Rubber bumper, Air cushion | ||||||||
|
Allowable kinetic energy |
Rubber bumper |
Male thread | 0.27 J | 0.4 J | 0.65 J | 1.2 J | |||
| Female thread | 0.11 J | 0.18 J | 0.29 J | 0.52 J | |||||
|
Air cushion (Effective cushion length (mm)) |
Male thread | 0.54 J (11.0) |
0.78 J (11.0) |
1.27 J (11.0) |
2.35 J (11.8) |
||||
| Female thread | 0.11 J | 0.18 J | 0.29 J | 0.52 J | |||||
Strokes
|
Bore size (mm) |
Standard stroke (mm) Note 1) |
Maximum manufacturable stroke (mm) |
||||
| 20 | 25, 50, 75, 100, 125, 150, 200, 250, 300 | 1000 | ||||
| 25 | 1500 | |||||
| 32 | 2000 | |||||
| 40 | ||||||
Note 1) Intermediate strokes not listed above are produced upon receipt of order. Manufacture of intermediate strokes in 1 mm intervals is possible. (Spacers are not used.)
Note 2) Applicable strokes should be confirmed according to the usage. For details, refer to “Air Cylinders Model Selection” on front matter pages of the Best Pneumatics No. 2 or the WEB catalog. In addition, the products that exceed the standard stroke might not be able to fulfill the specifications due to the deflection etc.
Ordering InformationDimension
Specification
| Bore Size(mm) | 20 | 25 | 32 | 40 | |||||
| Action | Single acting, Spring return Single acting, Spring extend | ||||||||
| Type | Pneumatic | ||||||||
| Fluid | Air | ||||||||
| Proof pressure | 1.5 MPa | ||||||||
| Maximum operating pressure | 1.0 MPa | ||||||||
| Minimum operating pressure | Single acting, Spring return | 0.18MPa | |||||||
| Single acting, Spring extend | 0.23 MPa | ||||||||
| Ambient and fluid temperature |
Without auto switch: −10°C to 70°C With auto switch: −10°C to 60°C (No freezing) |
||||||||
| Lubrication | Not required (Non-lube) | ||||||||
| Stroke length tolerance | (+1.4~0) mm | ||||||||
| Piston speed | 50 to 750 mm/s | ||||||||
| Allowable kinetic energy | Male thread | 0.27 J | 0.4 J | 0.65 J | 1.2 J | ||||
| Female thread | 0.11 J | 0.18 J | 0.29 J | 0.52 J | |||||
|
Bore size (mm) |
Standard stroke (mm) Note 1) | |||
| 20 | 25, 50, 75, 100, 125, 150 | |||
| 25 | 25, 50, 75, 100, 125, 150 | |||
| 32 | 25, 50, 75, 100, 125, 150, 200 | |||
| 40 | 25, 50, 75, 100, 125, 150, 200, 250 | |||
Note 1) Other intermediate strokes can be manufactured upon receipt of order.Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.)
Note 2) Applicable strokes should be confirmed according to the usage. For details, refer to “Air Cylinders Model Selection” on front matter pages of the Best Pneumatics No. 2 or the WEB catalog. In addition, the products that exceed the standard stroke might not be able to fulfill the specifications due to the deflection etc.
Ordering InformationDimension
